Tplink Archer GX90 Setup

You must perform the TPlink Archer GX90 setup accurately. The TPlink router is most suitable for small offices or home offices. You can rest assured of receiving a high-speed internet connection to all devices. However, to ensure this, you must set up the router correctly to make the most of it. If you fail to set up the router precisely, you will fail to receive a full-speed internet connection from the TPlink router. Thus, you must know the correct procedure to set up the router.

To proceed with the TPlink setup correctly, you must have the exact instructions. Therefore, today we have brought you the ultimate guide to setting up your TPlink router. To learn the complete procedure thoroughly, keep reading ahead.

Pre-TPLink Archer GX90 Setup Installation

To proceed with the TPlink Archer GX90 setup, there are a few things you must do. You need to prepare the router for the setup by following the below steps:

Firstly, turn your modem OFF and remove any backup batteries.
Secondly, install the antennas of the router correctly.
Now, connect the modem and the router using an Ethernet cable and turn the modem ON.
After that, power On the router by plugging the adapter into a power socket.
Finally, connect your device to the router’s network.
You can form a connection via an Ethernet cable or wirelessly.

These are the steps you must execute before the TPlink setup. Now, we can proceed with the setup.

Steps for the TPLink Archer GX90 Setup

Now, we can proceed with the setup. There are two ways for the setup; one is through the Tether app and the other is via the web browser.

TPLink Setup Through the Tether App

To begin with, install the Tether app on your smartphone.
Now, open the app and log into your TPlink ID.
If you don’t have an ID, you can create one.
After logging in, tap the (+) sign in the upper right corner.
Now, select the ‘Gaming Router’ option.
At last, you can follow the in-app instructions to set up the device.

Initially, open a web browser and enter the tplinkwifi.net address in the address bar.
Ensure your device has a connection with the router’s network.
Now, from the login page, you can log into your TP-Link ID.
If you don’t have one, you can create one.
After that, you can follow the instructions given by the app to set up your router.

These are the steps for the TPlink Archer GX90 setup. When the setup is complete, you can connect your devices to the router and enjoy a high-speed internet connection.

Troubleshooting the TPLink Archer GX90 Setup Issues

After or during the TPlink setup, you could come across numerous obstacles, that could cause difficulty in setting up the router. If you are facing some issues as well, don’t worry. You can troubleshoot them by following the below methods:

Inspect the Ethernet Connection

To access the login page of the router, you must connect your device to the router.
Without a stable connection, you cannot log into the router’s user interface.
It is recommended to form the connection via an Ethernet cable.
A wired connection is much more stable than a wireless connection.
Check the Ethernet cable connection and ensure it’s not loose.

Fix the Web Browser

If you are logging in through the web browser, it could have an issue as well.
Before logging in, clear out the browser cache, as it can prevent you from logging in.
Moreover, if there’s any firewall or ad-blocker enabled, you will have to disable it as well.
You can try using another web browser to execute the Tplink Archer GX90 setup.
Just ensure to use an up-to-date browser only for the setup.

Power Cycle the Device

If you are unable to connect your device to the router’s network, you can try power cycling the router.
The power cycle fixes any minor glitches or bugs within the router.
Firstly, power OFF and unplug the router for some time.
Secondly, leave the device like that for a while.
After a few minutes, you can power it back ON.
Now, any issues with the router should be gone.

Enter the Correct Login Password

If you are unable to log into your TPlink ID, you can check the WiFi password.
You cannot log into the router’s user interface using an incorrect password.
To resolve this issue, you can click the ‘Forgot Password’ option.
After that, you can set a new password for your TPlink ID.
Now, you can log in, and proceed with the TPlink setup.

You can try these troubleshooting methods to fix the TPlink Archer GX90 setup issues. If there are any other troubles you are having with your TPlink router, you can reach out to our team right now.