It’s imperative to proceed with the TP Link Archer AXE75 setup accurately. You can make the most of your TP Link Archer only after setting it up. The TP Link Archer AXE75 is a tri-band router that provides up to 5400 Mbps speed. Moreover, you can create a Mesh network using a TP-Link range extender for seamless coverage all over your home. To enjoy all these features, you must set up the router precisely. After a proper setup, you can receive a high-speed internet connection.
For the TPlink setup, you require the correct instructions. This blog will assist you in setting up the Tp link Archer effectively. Keep reading ahead to find out the complete procedure.
Pre TP Link Archer AXE75 Setup Installation
Before we proceed with the TPlink setup, we need to proceed with some crucial steps. These steps are as follows:
- Before installing the router, power OFF the modem by unplugging it.
- Remove any backup battery if the modem has one.
- If you are using an Ethernet outlet as an ISP, you must link the router’s WAN port to it.
- After that, connect the router to a power outlet and turn the router ON.
- Now, you can turn the modem ON as well.
- Ensure the router’s 2.4GHz, 5GHz, and 6GHz LED lights are ON.
These are some steps you must proceed with before the TP Link Archer AXE75 setup. Further, we’ll discuss the setup procedure thoroughly.
Steps for the TPlink Setup
Now that the installation is complete, you can proceed with the setup. You can set up the router either using the web browser or the TP-Link Tether app. The procedure for the TP Link router setup is as follows:
TP Link Archer AXE75 Setup Via the Tether App
- Initially, download the Tether app on your mobile device.
- Ensure to connect your mobile to the router’s network.
- This app is available on both App Store and Play Store.
- Now, you can either log into your ID or create one if you don’t have an account.
- After logging in, click ‘+’ to add your device and click ‘Router’ to add your device.
- Hereon, select your device from the list.
- Finally, you can follow the instructions from the setup wizard to set up the router.
- When the TP Link Archer AXE75 setup is successful, you can link your devices to the router’s network.
TPlink Setup Via the Web Browser
- To begin with, connect your device to the router’s network.
- You can form a connection via an Ethernet cable or wirelessly .
- The SSIDs (Network name) and the password are available on the router’s network.
- Now, open a web browser and type the tplinkwifi.net address in the address bar.
- You can gain access to the router’s login page through the IP address as well.
- After that, you can log into your account or create a new account.
- At last, you can follow the on-screen instructions to set up the router.
These are the steps for the TPlink setup. Follow these steps accurately to set up the router accurately.
Troubleshooting the TP Link Archer AXE75 Setup Issues
Sometimes, some issues arise during the TPlink setup. It’s essential to figure out these problems and resolve them correctly. You can fix these issues by following the below methods:
Check the Cable Connections
- Sometimes due to an improper cable connection, issues within the router arise.
- Check the cable connection between the router and the modem.
- Ensure to plug the cable properly and ensure the connection isn’t loose.
- If you are using an ethernet cable to connect your device to the router, check that too.
- Also, ensure the router and the modem has a sufficient power source.
Power Cycle the Router
- You can try power cycling the router to fix any internal issues within the router.
- Initially, power OFF the router and unplug it.
- Leave the router like that for some time.
- After a few minutes, you can power it back ON and turn it back ON.
- Now, you can try again with the TPlink setup.
Check the Web Browser
- Sometimes there’s an issue with the browser preventing you from logging in.
- Before you log in, clear out the browser cache, as due to the cache, you are unable to log into the user interface.
- You can also try using a different web browser if the current one doesn’t work.
- Ensure to use an up-to-date browser only for the login.
These are some troubleshooting methods you can try to resolve the TP Link Archer AXE75 setup issues. If there are any other difficulties you are facing with your TP-Link router, you can get in touch with our team right now.